Setting Secure Reception; Printing An Image Stored With Secure Reception - Oki MC853 User Manual

Setting Secure Reception

Setting Secure Reception

Printing an Image Stored with Secure Reception

Setting Secure Reception
1.
Press [Device Settings] on the touch panel.
2.
Press or
3.
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "aaaaaa"
respectively.
4.
Press [Fax Setup].
5.
Press [Security Function].
6.
Press [Secure Receive].
7.
Press [Setting].
8.
Enter a 4-digit number by using the 10-key pad, and then press
[OK].
Note
When previewing or printing received faxes, you need to enter the password you set in this
step. If you press [OK] without entering a password, previewing and printing can be
performed without entering a password.
Memo
To disable the secure reception, press [Setting], and then press [OFF] in step 7.
Printing an Image Stored with Secure Reception
Print an image that is received by fax and stored in Memory.
Check that the [DATA IN MEMORY] lamp lights up.
If the lamp is off, there are no images that are received by fax and stored in Memory.
1.
Press [Device Settings] on the touch panel.
2.
Press or
several times and press [Admin Setup].
several times and press [Store Document Settings].
566