Setting For Receptions; Setting The Reception Mode - Oki MC563 User Manual

Setting for Receptions

This section describes various settings when receiving a fax.

• Setting the Reception Mode

• DRD
• Setting the Waiting Time from When an Incoming Call Arrives to When Reception Starts
(Response Waiting Time)
Setting the Reception Mode
[Fax Ready Mode] is set by factory default.
Change the setting according to your environment.
• [Fax Ready Mode] : Select this mode if you use this machine for fax only.
• [Tel/Fax Ready Mode] : Select this mode if you want to receive both phone calls and faxes
with the machine detecting automatically.
• [Ans/Fax Ready Mode] : Select this mode if you want to use the answering phone function
of an external telephone as well as the fax function of the machine.
• [Tel Ready Mode] : Select this mode if you often use the external telephone that is
connected to the machine.
• [DRD] : If you use the distinctive ring detection (DRD) function that is provided by a
telephone company. Refer to "DRD".
1
Check that the machine is turned on.
2
Press the (SETTING) button on the operator panel.
3
Press the button to select [Admin Setup] and press the
4
Enter the administrator password.
- 111 -
7. Fax
(OK) button.