Table of Contents
Advertisement
C
HANGING THE DISPLAY LANGUAGE
The default language used by your machine for display messages is English. If required,
this can be changed using the Panel Language Set-up utility.
G
ETTING STARTED
P
OWER SAVING MODE
If you do not use the machine for a while, it will enter the power saving mode to control
the power consumption of the device. To cancel or initiate power saving mode, press the
Power Save / Wake Up button on the control panel.
NOTE
If your machine is connected locally (via USB), when it transitions to Sleep
mode its status is viewed as off-line. To use the printer in this state, you must
press the Power Save / Wake Up button to exit sleep mode.
S
WITCHING OFF
1.
Press the Enter button on the control panel to enter the menu.
2.
Press the Menu down button and scroll to the Shutdown menu.
3.
Press the Enter button.
4.
Press the Enter button to continue.
5.
Press the Enter button to execute.
6.
At the prompt, turn the power switch OFF.
Introduction > 12
Advertisement
Table of Contents
