Scanner Rom - Toshiba e-STUDIO205L Service Handbook

8.3.1

Scanner ROM

Important:
• Be sure to shut down the equipment before installing and removing the download jig.
• Do not shut down the equipment during the update. The data could be damaged and not be
able to be operated properly.
Note:
Since the update data for the MR-3021 and the MR-3022 differ, be sure to install the correct
ROM according to the model.
[A] Update Procedure
(1) Install the ROM to the download jig (K-PWA-DLM-320).
Make sure the direction is correct.
(2) Press the [ON/OFF] button on the control panel to shut down the equipment and turn the power
OFF using the main power switch.
(3) Take off the right upper cover.
(4) Take off the cover plate.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Right upper
cover
Fig. 8-19
Cover plate
Fig. 8-20
8 - 25
e-STUDIO205L/255/305/355/455
FIRMWARE UPDATING
8