Toshiba e-STUDIO205L Service Handbook page 122

Classific
Code
ation
480 Paper Default setting of paper
feeding source
481 Paper Automatic change of
feeding paper source
482 Paper Feeding retry setting
feeding
483 Laser Pre-running rotation of
polygonal motor
484 Laser Polygonal motor
rotational status
switching at the Auto
Clear Mode
485 Laser Rotational status of
polygonal motor on
standby
e-STUDIO205L/255/305/355/455
SELF-DIAGNOSIS MODES
Setting mode (08)
Functi
Items
on
PPC
PPC
ALL
ALL
ALL
ALL
2 - 94
Default
Boa
<Acceptable
rd
value>
0 SYS 0: A4/LT 1: LCF
<0-5> 2: Upper drawer
3: Lower drawer
4: PFP upper drawer
5: PFP lower drawer
1 SYS Sets whether or not
<1-2> changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
1: ON (Changes to the
drawer with the
same paper
direction and size:
e.g., A4 to A4)
2: ON (Changes to the
drawer with the
same paper size.
Paper with the
different direction is
acceptable as long
as the size is the
same: e.g., A4 to
A4-R, LT-R to LT. "1"
is applied when the
staple/hole-punch is
specified.)
0 M 0: ON
<0-1> 1: OFF
0 SYS Sets whether or not
<0-2> switching the polygonal
motor from the standby
rotation to the normal
rotation when the
original is set on the
RADF or the original
cover is opened.
0: Valid (when using
RADF and the
original is set
manually)
1: Invalid
2: Valid (when using
RADF only)
0 SYS Sets whether or not
<0-1> switching the polygonal
motor from the normal
rotation to the standby
rotation at the Auto
Clear Mode.
0: Valid
1: Invalid
1 SYS Sets the rotational
<0-1> status of polygonal
motor on standby.
0: Rotated (The
rotational speed is
set at 08-490.)
1: Stopped
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Proce
Contents
dure
1
1
1
1
1
1