Printer Function Error - Toshiba e-STUDIO205L Service Handbook

6.3.16

Printer function error

[4030] No printer kit/Invalid
Install the print kit and perform the job again.
Register it officially and perform the job again.
[4031] HDD full failure during printing
Reduce the number of pages of the job in error and perform the job again.
Check if the server or local disk has a sufficient space in disk capacity.
[4032] Private-print-only error
Select "Private", and then perform the printing again.
[4033] Printing data storing limitation error
Select "Normal Print", and then perform the printing again.
[4034] e-Filing storing limitation error
Select "Normal Print", and then perform the printing again.
[4035] Local file storing limitation error
Select "Remote" (SMB/FTP) for the destination of the file to save.
[4036] User authentication error
Perform the authentication or register as a user, and then perform the printing again.
[4037] Hardcopy security printing error
Hardcopy security printing cannot be performed because the function is restricted in the self-diagnosis
mode.
[4038] Restriction error (only for hold print jobs)
Select [Hold Print] to retry
[4039] Restriction error (only for private/hold print jobs)
Select [Private Print] or [Hold Print] to retry
[4040] Not being authorized to perform JOB
Confirm the administrator for the JOB authorization.
[4050] Problem in LDAP server connection or LDAP server authorization settings
Confirm the administrator for the LDAP server connection or LDAP server authorization settings.
[4300] Job execution error due to functional restrictions
USB direct printing cannot be performed because the function is restricted by the self-diagnosis. Check
the self-diagnosis setting.
e-STUDIO205L/255/305/355/455 © 2009 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
6 - 118