Options - Toshiba e-STUDIO205L Service Handbook

1.3

Options

original cover
Reversing Automatic
Document Feeder (RADF)
Drawer Module
Paper Feed Pedestal (PFP)
Large Capacity Feeder (LCF)
Finisher
Finisher (Hanging type)
Saddle stitch Finisher
Hole Punch Unit
Staple Cartridge
Bridge Kit
Job Separator
Offset Tray
Operator's manual pocket
Accessible Arm
Work Tray
Damp Heater
Fax Unit
2nd Line for Fax Unit
Printer kit
Printer/Scanner kit
Scanner upgrade kit
Wireless LAN Adapter
Bluetooth Module
Antenna
e-BRIDGE ID Gate
Desk
Meta Scan Enabler
External Interface Enabler
Data Overwrite Enabler
IP Sec Enabler
Harness kit for coin controller
* 1) N: North America
Notes:
• "-" means "Not acceptable".
• The bridge unit (KN-2520) is necessary for installation of the finisher (MJ-1101, MJ-1024, MJ-
1025, MJ-1031).
• The finisher (MJ-1101) is necessary for installation of the hole punch unit (MJ-6101N/E/F/S).
• The finisher (MJ-1024) is necessary for installation of the hole punch unit (MJ-6004N/E/F/S).
• The finisher (MJ-1025) is necessary for installation of the hole punch unit (MJ-6005N/E/F/S).
• The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1050) and
Bluetooth module (GN-2010).
• Only one Antenna (GN-3010) can be installed in the Bluetooth Module (GN-2010), while up to
two can be installed in the Wireless LAN Adapter (GN-1050).
• The Work Tray (KK-4550) and the e-BRIDGE ID Gate (KP-2004/2005) cannot be installed
together.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
e-STUDIO205L/255/305
KA-1640 PC/PC-C
MR-3021/C
MY-1033/C
KD-1025/C
KD-1026 A4/LT/A4-C
-
MJ-1031/C
MJ-1025
*1
MJ-6005N/E/F/S
STAPLE-2000 (for MJ-1025/MJ-
1031)
KN-2520/C
MJ-5004/-C
MJ-5005/-C
KK-1660/-C
KK-2550
KK-4550/C
MF-4550 U/E
GD-1250 NA/EU/AU/AS/TW/C
GD-1260 NA/EU/AU/TW/C
GM-1150/C
GM-2150/C
GM-4150/C
GN-1050/C
GN-2010
GN-3010/C
KP-2004 (HID)
KP-2005/C (MIFARE)
MH-2520
GS-1010
GS-1020
GP-1070
GP-1080
GQ-1180
E: Europe F: France
1 - 9
e-STUDIO355/455
KA-1640 PC/PC-C
MR-3022/C
MY-1033/C
KD-1025/C
KD-1026 A4/LT/A4-C
MJ-1101/-C
MJ-1031/C
MJ-1024
(for MJ-1025) MJ-6004N/E/F/S
MJ-6101N/E/F/S
STAPLE-600 (for MJ-1024)
STAPLE-2000 (for MJ-1024/MJ-
1031)
STAPLE-2400 (for MJ-1101)
KN-2520/C
MJ-5006/C
-
KK-1660/-C
KK-2550
KK-4550/C
MF-4550 U/E
GD-1250 NA/EU/AU/AS/TW/C
GD-1260 NA/EU/AU/TW/C
GM-1160/C
GM-2160/C
GM-4160/C
GN-1050/C
GN-2010
GN-3010/C
KP-2004 (HID)
KP-2005/C (MIFARE)
MH-2520
GS-1010
GS-1020
GP-1070
GP-1080
GQ-1180
S: Sweden
SPECIFICATIONS / ACCESSORIES / OPTIONS / SUPPLIES
*1
(for MJ-1024)
*1
(for MJ-1101)
e-STUDIO205L/255/305/355/455
1