Paper Feeding System Related Service Call - Toshiba e-STUDIO205L Service Handbook

6.3.7

Paper feeding system related service call

[C040] PFP motor is abnormal
Is the PFP motor working? (Perform the output check in the test mode: 03-109/159)
l NO
l
l
l
l
l
l
l
l
l
l
YES
Is the LED on the PFP motor board lit without flickering?
l NO
l
l
l
l
l
YES
1. Check if the PLL lock signal CN246-7 output from the PFP board is always "L" level.
2. Check if the voltage supplied to the microcomputer input terminal IC5-17 is always "L"
level.
3. Replace the PFP board.
4. Replace the LGC board.
[C130] Upper drawer tray is abnormal
[C140] Lower drawer tray is abnormal
Does the tray go up? (Perform the output check in the test mode: 03-242/243)
l NO
l
l
l
l
l
YES
© 2009 TOSHIBA TEC CORPORATION All rights reserved
1. Check if the signal line connector CN506 of the PFP motor is
disconnected.
2. Check if the connector CN246 on the PFP board is disconnected.
3. Check if the connector CN241 on the PFP board is disconnected.
4. Check if the connector CN318 on the LGC board is disconnected.
5. Check if the connector pins are disconnected and the harnesses are
open circuited.
6. Check if the conductor patterns on the PFP motor board, PFP board
and LGC board are short circuited or open circuited.
7. Replace the PFP motor.
8. Replace the PFP board.
9. Replace the LGC board.
1. Check if the connector pins are disconnected and the harnesses are
open circuited.
2. Check if the conductor patterns on the PFP motor board, PFP board
and LGC board are short circuited or open circuited.
3. Replace the PFP motor.
4. Replace the PFP board.
5. Replace the LGC board.
1. Check if the connector of the tray-up motor is disconnected.
2. Check if the connector CN316 on the LGC board is disconnected.
3. Check if the connector pins are disconnected and the harnesses are
open circuited.
4. Check if the conductor pattern on the LGC board is short circuited or
open circuited.
5. Replace the LGC board.
6 - 65
e-STUDIO205L/255/305/355/455
ERROR CODE AND TROUBLESHOOTING
6