Adjustment Of The Scanner Section - Toshiba e-STUDIO205L Service Handbook

3.9

Adjustment of the Scanner Section

3.9.1 Carriages
[A] Installing carriage wires
When replacing the carriage wires, refer illustrations below:
[Front side]
Wire pulley
[Rear side]
Idler pulley
Adjustment of the carriage wire tension is not necessary since a certain tension is applied to the
carriage wires by the tension springs.
Note:
Make sure the tension applied to the wire is normal.
e-STUDIO205L/255/305/355/455
ADJUSTMENT
Carriage-2
Carriage wire
Bracket for carriage-1
Tension spring
Fig. 3-30
Carriage-2
Tension spring
Fig. 3-31
3 - 48
Hook
Carriage wire
Bracket for carriage-1
Hook
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Idler pulley
Wire pulle