Image Dislocation In Feeding Direction - Toshiba e-STUDIO205L Service Handbook

6.4.18

Image dislocation in feeding direction

Defective area
Scanner/Printer
adjustment
Registration roller
Feed clutch
Pre-registration guide
e-STUDIO205L/255/305/355/455
ERROR CODE AND TROUBLESHOOTING
Fig. 6-19
Step Check items
1 Have the printed images been
dislocated in the same manner?
2 Is the registration roller dirty, or the
spring detached?
3 Is the registration roller working
properly?
4 Is the feed clutch working properly?
5 Is the pre-registration guide installed
properly?
6 - 138
Prescription
Adjust the position of the leading
edge of paper in the Adjustment
Mode.
Clean the registration roller with
alcohol.
Securely attach the springs.
Adjust or replace the gears if they are
not engaged properly.
Check the circuit or feed clutch, and
replace them if necessary.
Install the guide properly.
© 2009 TOSHIBA TEC CORPORATION All rights reserved