Error Code List - Toshiba e-STUDIO205L Service Handbook

6.2

Error Code List

The following error codes is displayed at the upper right of the screen when the "CLEAR PAPER" or
"CALL SERVICE" symbol is blinking.
6.2.1 Jam
Error code Classification
E010 Paper exit jam
E020
E030 Other paper jam
E061
E062
E063
E064
E065
E090
E110 Paper misfeeding
E120
E130
E140
E150
E160
E190
e-STUDIO205L/255/305/355/455
ERROR CODE AND TROUBLESHOOTING
Contents
Jam not reaching the exit sensor: The paper which
has passed through the fuser unit does not reach
the exit sensor.
Stop jam at the exit sensor: The trailing edge of the
paper does not pass the exit sensor after its leading
edge has reached this sensor.
Power-ON jam: The paper is remaining on the
paper transport path when power is turned ON.
Incorrect paper size setting for upper drawer: The
size of paper in the 1st drawer differs from size
setting of the equipment.
Incorrect paper size setting for lower drawer: The
size of paper in the 2nd drawer differs from size
setting of the equipment.
Incorrect paper size setting for PFP upper drawer:
The size of paper in the 3rd drawer differs from size
setting of the equipment.
Incorrect paper size setting for PFP lower drawer:
The size of paper in the 4th drawer differs from size
setting of the equipment.
Incorrect paper size setting for bypass tray: The
size of paper in the bypass tray differs from size
setting of the equipment.
HDD abnormality causes jam: Image data to be
printed cannot be prepared.
ADU misfeeding (Paper not reaching the
registration sensor): The paper which has passed
through ADU does not reach the registration sensor
during duplex printing.
Bypass misfeeding (Paper not reaching the 1st
transport sensor): The paper fed from the bypass
tray does not reach the 1st transport sensor.
Upper drawer misfeeding (Paper not reaching the
1st transport sensor): The paper fed from the upper
drawer does not reach the 1st transport sensor.
Lower drawer misfeeding (Paper not reaching the
2nd transport sensor): The paper fed from the lower
drawer does not reach the 2nd transport sensor.
PFP upper drawer misfeeding (Paper not reaching
the PFP upper drawer feed sensor): The paper fed
from the PFP upper drawer does not reach the PFP
upper drawer feed sensor.
PFP lower drawer misfeeding (Paper not reaching
the PFP lower drawer feed sensor): The paper fed
from the PFP lower drawer does not reach the PFP
lower drawer feed sensor.
LCF misfeeding (Paper not reaching the LCF feed
sensor): The paper fed from the LCF does not
reach the LCF feed sensor.
6 - 2
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Troubleshooting
P. 6-26
P. 6-26
P. 6-27
P. 6-27
P. 6-27
P. 6-27
P. 6-27
P. 6-27
P. 6-28
P. 6-38
P. 6-38
P. 6-39
P. 6-40
P. 6-40
P. 6-41
P. 6-43