Poor Image Transfer - Toshiba e-STUDIO205L Service Handbook

6.4.15

Poor image transfer

Defective area
Paper
Transfer roller unit
Registration roller
High-voltage transformer
(Transfer roller unit)
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-16
Step Check items
1 Is the paper in the drawer or LCF/
PFP curled?
2 Is the paper in the drawer or LCF
damp?
3 Is the paper type corresponding to its
mode?
4 Using the recommended paper?
5 Is the transfer roller contacting with
the drum? Are the charger pushing-
spring and the transfer roller
pressure spring installed properly?
6 Is there any abnormality related to
the registration roller or with the roller
itself?
7 Is the high-voltage transformer
output defective?
6 - 135
Prescription
Reinsert the paper with the reverse
side up or change the paper.
Avoid storing paper in damp place.
Select the proper mode.
Use the recommended paper.
Check them and reinstall if required.
Clean the roller if it is dirty. Securely
attach the springs if they are
detached. Replace the clutch if it is
defective. Adjust the rotation speed
of the roller.
Adjust the output, or replace the
transformer.
e-STUDIO205L/255/305/355/455
ERROR CODE AND TROUBLESHOOTING
6