10.1.3
Setting procedure
(1)
Start up the self-diagnosis setting mode 08-765, and then change the setting value to "0".
(2)
Turn the power OFF, and then ON.
(3)
Press the [USER FUNCTIONS] button to enter the user function screen.
(4)
Press the [ADMIN] tab.
•
When the Administrator Password has been set, ADMINISTRATOR PASSWORD screen is
displayed.
(5)
Press the [PASSWORD] button and the screen is switched to a full keyboard. Then key in the
Administrator Password and press the [ENTER] button.
* Confirm the password to the administrator.
e-STUDIO205L/255/305/355/455
REMOTE SERVICE
Fig. 10-1
© 2009 TOSHIBA TEC CORPORATION All rights reserved
10 - 4