Configuring The Snmp Agent - Symbol Spectrum24 AP-4100 Series Product Reference Manual

Configuring the AP
2.6

Configuring the SNMP Agent

An SNMP manager application gains access to the AP SNMP agent if it has
the AP IP address. An AP can be accessed through the SNMP Trap Manager
to configure settings and parameters, Symbol does not recommend
this process.
Configuring the encryption Keys using the SNMP Trap Manager overrides
the Key values for the AP or APs accessed by the SNMP Trap Manager.
The agent configures as read-only, read-write or disabled to provide security
when using SNMP . The AP sends specific traps for some conditions.
Ensure the SNMP trap manager recognizes how to manage these traps.
Refer to the Symbol MIB available on the Spectrum24 High Rate 11 Mbps
Wireless LAN Software CDROM or from http://www.symbol.com/services/
downloads/download_spec24.html.
The AP supports SNMP Version 1, a limited feature set of SNMP Version 2,
the IEEE 802.11 MIB-II and the SYMBOL.MIB.
94 AP-4100 Series Access Point Product Reference Guide