Symbol Spectrum24 AP-4100 Series Product Reference Manual page 62

Configuring the AP
3. The Change System Passwords screen displays:
4. Change the passwords using the following parameters:
5. Select
6. The system prompts
7. Select
54
Symbol Access Point
Password for user access(Monitor only)
User Allows the user to only monitor or view the screens.
Password Select any alphanumeric, case-sensitive entry up to
13 characters, the characters selected are displayed
as asterisks. The default password is Symbol.
Admin Allows the user to view and change the parameters
Password on each screen. Select any alphanumeric, case-
sensitive entry up to 13 characters, the characters
selected are displayed as asterisks. The default
password is Symbol.
or to register settings by writing changes to NVM.
OK Save
Selecting displays a confirmation prompt.
Save
or press
Cancel
screen and return to the previous menu.
Change System Passwords
User Password *******
Admin Password *******
Save-[F1]
"
Are you sure (Y/N)?
to disregard any changes made to this
[ESC]
AP-4100 Series Access Point Product Reference Guide
Cancel-[ESC]
Type
.
"
Y