Symbol Spectrum24 AP-4100 Series Product Reference Manual page 143

9. Type the TFTP Server IP address in the TFTP Server field.
10. Press ENTER.
11. Select
12. Select
13. Press
14. Select
To view the file transfer log, switch to the TFTP application.
15. Telnet to the AP using its IP address.
16. At the prompt type the case sensitive password:
AP-4100 Series Access Point Product Reference Guide
to save settings.
Save-[F1]
Special Functions
to view the
F3
Symbol Access Point
Firmware Update Menu
Use TFTP to update Access Point's:
Firmware HTML file
Use XMODEM to update Access Point's:
Firmware HTML file
Use TFTP to update ALL Access Points':
Firmware HTML file
Alter Filename(s)/HELP URL/TFTP Server
.Firmware Filename dsap_fw.bin
.HTML Filename
.Config. Filename ap_cfg.txt
.ACL Filename
.HELP URL
.TFTP Server
Previous-[F4]
Use TFTP to update ALL Access Point's
Are you sure yes no?
The Telnet session ends when the user answers
The AP resets when the file transfer and FLASH programming completes.
from the Main Menu.
.
Firmware Update Menu
Firmware and HTML File
Firmware and HTML File
dsap_htm.bin
ap_acl.txt
111.111.12.137
Exit-[ESC]
is displayed. Type
Config
Config
and press ENTER.
.
y
at the prompt.
y
Symbol
135