Symbol Spectrum24 AP-4100 Series Product Reference Manual page 192

Hardware Installation
5. When all WLAP connections are in Forward state:
Special cases:
•
•
•
•
184
LED
Power
Wired LAN Activity
Wireless LAN Activity
If the WLAP manual BSS_ID is NOT set and no other WLAP is found,
the WLAP goes to the functional state.
If the WLAP manual BSS_ID is set and the specified WLAP is not found,
the WLAP remains in FULL Scan state permanently. The LEDs have the
following indicator status permanently:
LED
Power
Wired LAN Activity
Wireless LAN Activity
If the WLAP manual BSS_ID is set with the broadcast bit ON (i.e. the first
Byte is 01 ) and the specified WLAP is not found, the WLAP tries to
associate with another WLAP . If it still cannot find another WLAP , it goes to
Functional State.
If the Ethernet Timeout in the System Configuration menu is set to 3,
the WLAP will keep track of the WLAP Alive BPDU. If the BPDU is missing
for WLAP Hello Time seconds, the WLAP state changes to WLAP Lost on
Ethernet and the LEDs have the following states:
LED
Power
Wired LAN Activity
Wireless LAN Activity
State
On
Blinks if activity occurs
Blinks regularly
State
On
Off
Blinks slowly
State
On
Blinks slowly
Off
AP-4100 Series Access Point Product Reference Guide