Symbol Spectrum24 AP-4100 Series Product Reference Manual page 130

Configuring the AP
2. Set Any Event Logging to
3. Verify the values reflect the network environment.
4. Select
5. Select
6. The system prompts
7. Select
122
that do not require logging when disabling Any Event Logging. Use
SPACE BAR or LEFT/RIGHT-ARROW keys to toggle between Enabled
and Disabled.
Any Event
Logging
Security
Violations
MU State
Changes
WNMP Events
AP-AP Msgs
Telnet Logins
System Events
Ethernet Events
Change them as needed.
or to register settings by writing changes to NVM.
OK Save
Selecting displays a confirmation prompt.
Save
Save ALL APs
Configuration information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP , sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets once modified. Users can perform this option
only among the same hardware platforms and firmware version.
Type
.
Y
yes no
Cancel-[ESC]
return to the previous menu.
to log all events. Specify the events
Enabled
Logs all events listed in the screen.
ACL filter, administrative password access
violations or Kerberos errors.
Allows logging all MU state changes.
WNMP events such as MUs using WNMP .
AP to AP communication.
Telnet sessions for monitoring and administration.
Internal use only.
Events such as packet transmissions and errors.
or press to save the Event Logging
[F2]
Warning Update, save, and reset all APs in the Known AP Menu?
to disregard any changes made to this screen and
AP-4100 Series Access Point Product Reference Guide