Table of Contents
Advertisement
Configuring the AP
2.7.5
ACL Options
To switch between
the System Configuration screen.
Use ACL options from the Set System Configuration menu.
Where:
Option
Allowed
Disallowed
Disabled
1. Select
2. Press TAB to select
3. Press SPACE BAR to select
4. Select
2.7.6
Removing All Allowed MUs
The AP provides a facility to remove all MUs from the ACL.
1. Select
2. Select
2.7.7
Load ACL from MU List
This option from the Special Functions menu takes all associated MUs and
creates an ACL from them. This builds an ACL without having to manually
type addresses. Edit the ACL using the add and delete functions.
1. Select
2. Select
104
Allowed
Description
to allow only MUs with their MAC address in the ACL to
associate with AP .
to prevent MUs in the Address Filters list from associating
with the AP .
allows any MU to associate with the AP (no ACL/filters
are in effect).
Set System Configuration
to save changes.
Save
Special Functions
.
Clear ACL
Special Functions
Load ACL from MU List
the ACL.
,
or
Disallowed
from the Main Menu.
.
Access Control
,
Allowed
Disallowed
from the Main Menu.
from the Main Menu.
to add addresses of associated MUs to
AP-4100 Series Access Point Product Reference Guide
options locate the ACL in
Disabled
or
Disabled
.
Advertisement
Table of Contents
