Symbol Spectrum24 AP-4100 Series Product Reference Manual page 48

Configuring the AP
2. At the prompt type the password:
The password is case-sensitive.
3. Press the ESC key. The AP displays the Main Menu:
4. Proceed to section 2.13.1: "Update Using TFTP" on page 123 to update
40
Symbol
Symbol Access Point
Show System Summary
Show Interface Statistics
Show Forwarding Counts
Show Mobile Units
Show Known APs
Show Ethernet Statistics
Show RF Statistics
Show Misc. Statistics
Show Event History
Enter Admin Mode
– If the session is idle (e.g. no input) for the configured time, the
session terminates.
– Press CTRL+D to manually terminate the session.
the AP firmware or HTML file or to section 2.2: "Navigating the UI" on
page 50.
MAIN MENU
AP Installation
Special Functions
Set System Configuration
Set RF Configuration
Set Access Control List
Set Address Filtering
Set Type Filtering
Set SNMP Configuration
Set Event Logging Configuration
AP-4100 Series Access Point Product Reference Guide