Symbol Spectrum24 AP-4100 Series Product Reference Manual page 150

Configuring the AP
2.20 Configuring Network Time
The access point is able to display the local time of the Kerberos server used
to validate requests for secured (password protected) resources. Kerberos
allows for some clock skew between servers and access points as set in both
the KDC and access points to account for clock discrepancies.
To view the access point network time:
1. From the main menu, select
Only use the Configure Network Time screen when the optional KSS utility is
not being used. Network time is needed to associate the time of day to
mobile unit requests for access point resources.
2. Select
3. Configure the settings as required.
142
Configure Network Time.
Symbol Access Point
Time Server Time
Time Server
Clock Skew
Time Server Time
Time Server
Clock Skew
Special Functions.
Configure Network Time
14:00 PST
Racheal
300
Current time and time zone.
Name or IP address of the time server.
Allowable time difference from the server (in
seconds). The access point assumes the clock
skews one minute per hour and re-synchronizes
with the time server after the clock skew period
multiplied by 60.
AP-4100 Series Access Point Product Reference Guide