Table of Contents
Advertisement
Succ Reass Packets
Unsucc Reass Packets
Fragments Rcvd
Rcv Duplicate Pkts
Undecryptable Pkts
Rcv CRC Errors
Rcv ICV Errors
AP-4100 Series Access Point Product Reference Guide
–
Select
Refresh
–
Select
to automatically update this display every two seconds.
Timed
–
Select
to display the
WLAP
–
Select
Link Test
WNMP packets once per second, the graph displays the signal
strength of each reply, the received packet TX rate, and the number
of retries required. This feature is useful for testing high gain WLAN
bridge installations and MU throughput.
–
Press ESC to return to the previous menu.
The packets successfully reassembled.
The packets unsuccessfully reassembled.
The packet fragments received.
The Duplicate packets received by the AP . This
indicates the AP sent an ACK, but the MU did not
receive it and transmitted the packet again.
The total data packets that could not be decrypted.
The Packets received that contained CRC (Cyclic
Redundancy Check) errors. An MU transmitted a
corrupt data packet and failed to pass the CRC
verification. Ensure that any acknowledgment of the
data packet contains the correct CRC word.
An incorrect CRC causes the AP to discard the
data packet.
The Packets received containing ICV (Identity Check
Value) errors. An MU transmitted a corrupt data
packet and failed to pass the ICV verification. The
calculated ICV value does not match with the ICV
value in the received packet.
at the status display to update the values manually.
WLAP RF Statistics
to display a signal strength graph. The AP sends
page.
163
Advertisement
Table of Contents
