Table of Contents
Advertisement
Monitoring Statistics
Use TAB or arrow keys to highlight the desired screen. Press ENTER to display
the selected screen.
•
The display shows the currently associated MUs listed by MAC address.
The list appears as follows:
Where:
addr
p
i
#
e
V
NK
•
152
Select Regular from the Mobile Units prompt to display:
Symbol Access Point
00:A0:F8:29:C9:E2: C:R11:
00:A0:F8:10:4A:13 P:R11:
Information-[CR]
Echo-[F1]
addr [p:i:#:e:V]
MU MAC address in xx:xx:xx:xx:xx:xx format
MUs power mode: P for PSP , C for CAM. An unassociated MU
does not display any character.
MU location on AP interfaces (R for radio). MUs with an A were
associated with the AP in the past, but no longer associate with
it at time of verifying status.
AP current Radio transmit rate for the messages sent to this MU:
11 for 11 Mbps.
Encryption is enabled for this device.
Indicates a Symbol Voice enabled device.
MU failed to obtain a session key.
To bring up the WNMP Packet Ping Function screen, press TAB to
highlight the MU and select
See section 2.15: "Performing Pings" on page 136.
–
Select
to automatically update this display every two seconds.
Timed
–
Select
to display the next screen.
Next
Mobile Units
Timed-[F2]
Next-[F3]
. This allows the AP to ping an MU.
Ping
AP-4100 Series Access Point Product Reference Guide
Exit-[ESC]
Advertisement
Table of Contents
