Table of Contents
Advertisement
Configuring the AP
If this is the first time the AP has been installed or has been moved to a new
country, verify that the proper country specific code is entered for the AP .
Refer to Appendix D for a list of supported country codes.
Verify that the proper country specific code is entered for the AP to conform to
the set of rules defined in national or international regulations.
58
Where:
Country Config
Unit Name
IP Address
Gateway IP Address
Additional
Gateways
Configure the AP for the user's country. This
item displays a list of country names. Use the
TAB key to highlight the appropriate country
and press
The AP displays
ENTER.
Sure?
Enter
Y
for yes. The display refreshes and
displays the new country. Prior to setting the
Country Config code, certain AP features are
not available. See Appendix D for AP country
code information.
The AP name.
The network-assigned Internet Protocol address
of the AP .
IP address of a router the AP uses on the
Ethernet as its default gateway.
The IP address of the additional gateways used.
Access up to seven gateways.
AP-4100 Series Access Point Product Reference Guide
Are You
Advertisement
Table of Contents
