Symbol Spectrum24 AP-4100 Series Product Reference Manual page 134

Configuring the AP
7. Select
8. Press ENTER.
9. Enter the firmware filename in the firmware field
Change this only if the user or system/network administrator requires a new
filename. The default for a 4121 model access point is dsap_fw.bin and
dsap_htm.bin.
dsap_fw.bin or dsap_htm.bin
Verify the path for the filename is accurate. (See step one)
10. Select
11. Press ENTER.
12. Select
13. The system prompts
If using telnet to connect to the AP through an Ethernet interface, do not use
the
the AP to reset and look for the firmware file over the serial interface.
14. Under the function heading
15. The system prompts
The Telnet session ends when the user answers "
126
Alter Filename(s)/HELP URL/TFTP Server.
field and enter the TFTP Server IP address.
.TFTP Server
to save settings.
Save- [F1]
Use XMODEM to Update Access Point
and press ENTER.
and HTML File
"
Are you sure (Y/N)?
Firmware
's
Use TFTP to Update Access Point
"
Are you sure (Y/N)?
AP-4100 Series Access Point Product Reference Guide
.Firmware Filename
Type
.
"
Y
option. This option causes
select
'
s:
Type
.
"
Y
" at the prompt.
y
.
Firmware