Symbol Spectrum24 AP-4100 Series Product Reference Manual page 68

Configuring the AP
5. In the Antenna Selection field, use the SPACE BAR or LEFT/RIGHT-
6. Select
7. Select
60
Additional
Gateways
DHCP/BOOTP
ARROW keys to toggle between
, or
Only Rx Diversity
or to register settings by writing changes to NVM.
OK Save
Selecting displays a confirmation prompt.
Save
Save ALL APs
configuration information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP on the
Known APs table to update their configuration and reset after the
The IP address of the additional gateways used.
Access up to seven gateways.
Enables or Disables selection of DHCP/BOOTP .
The options are:
•
Enabled
– DHCP and BOOTP interoperate,
whichever response the AP selects first
becomes the server allocating the
information.
•
DHCP Only
– Only DHCP responses will be accepted
by the AP .
•
BOOTP Only
– Only BOOTP responses will be accepted
by the AP . If both DHCP and BOOTP
services are required, do not selected
BOOTP Only.
access point ACL and configuration file
(cfg.txt) are uploaded.
•
Disabled
– Disables BOOTP and DHCP; network
configuration is manually entered.
Full Diversity
. . . .
or press to save the AP installation
[F2]
AP-4100 Series Access Point Product Reference Guide
When BOOTP is enabled, the
, , , ,
Primary Only
, , , ,
Secondary