Table of Contents
Advertisement
2.7.1
Configuring the ACL
The ACL supports adding MU entries by individual MAC address or by a
range of MAC addresses.
1. Select the Set Access Control List option from the Main Menu to display:
2. Use the UP/DOWN-ARROW keys to toggle between
2.7.2
Range of MUs
To select a range of MAC addresses:
1. Type in the minimum MAC address as the top value:
2. Press ENTER to accept the value; use the DOWN-ARROW key to select
3. Type in the maximum MAC address in the bottom value:
4. Press ENTER to accept the value; use the DOWN-ARROW key to
5. Press ENTER. The UI displays:
6. Verify values reflect the network environment. Change them as needed.
AP-4100 Series Access Point Product Reference Guide
Address Type?
range individual
.
individual
00:0A:F8:F0:01:01
the maximum value.
00:0A:F8:F0:02:FF
select OK.
Symbol Access Point
00:A0:F8:F0:01:01
00:A0:F8:29:10:02
Delete-[F1]
Add-[F2]
Ranges of Allowed Mobile Units
Min Address
Max Address
00:A0:F8:F0:02:FF
00:A0:F8:29:11:00
Save All APs-[F3]
Configuring the AP
and
range
Exit-[ESC]
101
Advertisement
Table of Contents
