Table of Contents
Advertisement
Configuring the AP
7. Select
8. Select
9. Select
10. The system prompts
11. Select
When users enable the Access Control option, all MUs within the specified
range can associate with the AP . Specify additional ranges as needed or add
to the ACL using individual address entries.
102
Delete-[F1]
to add a range of Mobile Units.
Add-[F2]
Save ALL APs
Units information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP , sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and firmware version.
Type
.
Y
yes no
Cancel-[ESC]
return to the previous menu.
to delete a range of Mobile Units.
or press
to save the Ranges of Allowed Mobile
[F3]
Warning Update, save, and reset all APs in the Known AP Menu?
to disregard any changes made to this screen and
AP-4100 Series Access Point Product Reference Guide
Advertisement
Table of Contents
