Symbol Spectrum24 AP-4100 Series Product Reference Manual page 100

Configuring the AP
Key values are displayed in plain text while being entered. Once saved, the
keys are displayed as all zeros (default display is all zeros).
128-Bit Encryption
If 128-bit encryption is the selected WEP Algorithm, this screen is displayed.
Symbol Access Point
Each key has 104 bits available to the user for configuration and are
displayed in two 20 bit segments and four 16 bit segments. The remaining
24 IV (initialization vector) bits are factory set and not user configurable.
1. Select the desired key and enter the new value to change the Key value.
2. Verify and change the values as needed to reflect the network
3. Select
4. Select
92
.Key 1
.Key 2
.Key 3
.Key 4
NOTE: Keys have WRITE-ONLY access
OK-[CR] Save-[F1]
environment.
or to register settings by writing changes to NVM.
OK Save
Selecting displays a confirmation prompt.
Save
Save ALL APs
Maintenance information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP , sends two
Encryption Key Maintenance
* 00000 00000 0000 0000 0000 0000
00000 00000 0000 0000 0000 0000
00000 00000 0000 0000 0000 0000
00000 00000 0000 0000 0000 0000
* = Active Key
Save All APs-[F2]
or press to save the Encryption Key
[F2]
AP-4100 Series Access Point Product Reference Guide
Cancel-[ESC]