Table of Contents
Advertisement
AP-4100 Series Access Point Product Reference Guide
WLAP Mode
WLAP Priority
Specifies the APs wireless-AP operation status.
Enabled
•
the AP sets up automatically for wireless
operation. The AP can operate in any of these
configurations: Wireless, Repeater or Ethernet
Bridge.
Disabled
•
no wireless operation possible. Default setting.
Link Required. At power up:
•
If the WLAP is the Root AP , an Ethernet connection
is required.
•
If the WLAP is a designated WLAP , association to
the Root AP is required.
During normal operation:
•
If the Ethernet connection is lost, the Root
AP resets.
•
If the WLAP association is lost, the designated
WLAP resets.
Allows a user to determine the Root and the
designated WLAP in wireless operation. Concatenate
the priority value as the most significant portion of
the MAC address. An AP with a lower numerical
value for priority is more likely to become the root AP .
The default is
8000
Configuring the AP
hex from the
0 - 0xFFFF
range.
79
Advertisement
Table of Contents
