Symbol Spectrum24 AP-4100 Series Product Reference Manual page 106

Configuring the AP
4. Select
5. Select
6. The system prompts
7. Select
98
or to register settings by writing changes to NVM.
OK Save
Selecting displays a confirmation prompt.
Save
Save ALL APs
information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP , sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and firmware version.
Type
.
Y
yes no
Cancel-[ESC]
return to the previous menu.
or press to save the SNMP Configuration
[F2]
Warning Update, save, and reset all APs in the Known AP Menu?
to disregard any changes made to this screen and
AP-4100 Series Access Point Product Reference Guide