Table of Contents
Advertisement
Configuring the AP
Use the TAB key to scroll through menu items.
Updating the firmware requires a TFTP server running in the background.
To update the AP firmware:
1. Copy the Firmware files dsap_fw.bin and dsap_htm.bin on the terminal
2. Telnet to the AP using its IP address.
3. At the prompt type the password:
The password is case-sensitive. Set the System Passwords in the Set System
Configuration screen.
4. Select
124
or PC hard disk.
Symbol
The AP displays the Main Menu.
Symbol Access Point
Show System Summary
Show Interface Statistics
Show Forwarding Counts
Show Mobile Units
Show Known APs
Show Ethernet Statistics
Show RF Statistics
Show Misc. Statistics
Show Event History
Enter Admin Mode
Enter Admin Mode
Symbol
MAIN MENU
AP Installation
Special Functions
Set System Configuration
Set RF Configuration
Set Access Control List
Set Address Filtering
Set Type Filtering
Set SNMP Configuration
Set Event Logging Configuration
and enter the password:
AP-4100 Series Access Point Product Reference Guide
Advertisement
Table of Contents
