Setting Up Mus - Symbol Spectrum24 AP-4100 Series Product Reference Manual

Hardware Installation
4. Slow or erratic performance:

4.11 Setting Up MUs

Refer to the LA-4100 Series PC Card & PCI Adapter Product Reference Guide
for installing drivers, client software and testing. Use the default values for
the Net_ID (ESS) and other configuration parameters until network
connection verification.
MUs attach to the network and interact with the AP transparently.
186
– Check that the radio driver loaded properly.
– Check that the MU PROTOCOL.INI or NET.CFG file is compatible
with the network operating system.
– Check MU and RF communications range.
– Check antenna, connectors and cabling.
– Verify that antenna diversity setting for AP is appropriate. If using
one antenna, the setting is
the setting is
Full Diversity
primary or secondary antenna and transmits on the last antenna to
receive a signal) or
on the primary or secondary antenna but transmits on the primary
antenna only).
– Verify network traffic does not exceed 37% of bandwidth.
– Check to see that the wired network does not exceed 10 broadcast
messages per second.
– Verify wired network topology and configuration.
Primary Only
(in this setting the radio receives on the
(in this setting the radio receives
Rx Diversity
AP-4100 Series Access Point Product Reference Guide
, if using both antennas,