Symbol Spectrum24 AP-4100 Series Product Reference Manual page 118

Configuring the AP
Edit the following AP_CFG.TXT file required for manual configuration of the
AP , to match the site specific network settings.
110
[APInstallation]
;CountryConfig
UnitName
;IPAddress
Gateway1
SubNetMask
NetID
AntennaSelect
DHCP
DNSServer1
DNSServer2
DNSServer3
[SpecialFunction]
FWFileName
HTMLFileName
ConfigFileName
ACLFileName
;HelpURL
;TFTPServer
TimeServerName
ClockSkew
[SystemConfig]
Channel
AutoChannelSelect
EthernetTimeOut
TelnetLogins
AgentAdInterval
S24MobileIP
MobileHomeMD5Key
USA
testhost.symbol.com
157.235.101.33
0.0.0.0
255.255.255.0
Engineering
Primary Only
Enabled
157.235.101.1
157.235.101.2
157.235.101.3
dsap_fw.bin
dsap_html.bin
ap_cfg.txt
ap_acl.txt
www.symbol.com
tftp.apfw.symbol.com
tms
300
11
Disabled
0
Enabled
0
Disabled
Symbol
AP-4100 Series Access Point Product Reference Guide
; full country name
; up to 31 chars
; comment out if DHCP enabled
; up to 32 chars
;"Full Diversity"
;"Primary Only"
;"Secondary Only"
;"Rx Diversity"
; "Disabled"
; "Enabled"
; "DHCP Only"
; "BOOTP Only"
; up to 49 chars
; up to 49 chars
; up to 49 chars
; up to 49 chars
; up to 49 chars
; ip address or name
; up to 128 characters
; 0 - 99999 seconds
; 1 - 11
; "Disabled", "Enabled"
; 0: disabled,
; 1: hw detection,
; 2,3,4: WLAP detection,
; 30 - 255 seconds: sw detection
; "Disabled", "Enabled"
; 0 - 1200 seconds
; "Disabled", "Enabled"
; up to 13 chars