Table of Contents
Advertisement
4. Click
Apply
to save any changes to the SNMP Trap Configuration screen. Navigating away
from the screen without clicking the Apply button results in all changes to the screen being
lost.
5. Click
Undo Changes
settings displayed on SNMP Trap Configuration screen to the last saved configuration.
6. Click
Logout
to securely exit the access point Symbol Access Point applet. A prompt
displays confirming the logout before the applet is closed.
4.4.3 Configuring Specific SNMP Traps
Use the
SNMP Traps
screen to enable specific traps on the access point. Symbol recommends
defining traps to capture unauthorized devices operating within the access point coverage area. Trap
configuration depends on the network machine that receives the generated traps. SNMP v1/v2c and
v3 trap configurations function independently. In a mixed SNMP environment, traps can be sent using
configurations for both SNMP v1/v2c and v3. To configure specific SNMP traps on the access point:
1. Select
System Configuration
(if necessary) to undo any changes made. Undo Changes reverts the
- >
SNMP Access
System Configuration
- >
SNMP Traps
from the menu tree.
4-31
Advertisement
Table of Contents
