Symbol Spectrum24 AP-4100 Series Product Reference Manual page 54

Configuring the AP
To ensure the
1. Access the UI using a Serial or Telnet connection.
2. From the
3. Verify the
4. Select
To reset the AP for changes to take effect.
1. Select the
2. Select
3. Select
To enable Help file access, change the Help URL parameter:
1. Select the
2. Press F3 to view the
3. Use the TAB or UP/DOWN ARROW key to select the
4. Press ENTER.
5. Use the TAB or DOWN ARROW key to select the
6. Type the IP address/URL (Universal Request Locator) of the Web server
7. Save the new setting by selecting
8. Select
46
Web Server
select
Main Menu
Web Server
is enabled.
to save the configuration.
Save-[F1]
Special Functions
Reset AP.
at the confirmation prompt.
Yes
Special Functions
.
URL/TFTP Server
and the directory/folder of the Web server for the Help file location.
http://xxx.xxx.xxx.xxx/WebHelp
Where xxx.xxx.xxx.xxx is the IP address of the server.
at the confirmation prompt.
Yes
option is enabled for the AP:
System Configuration
option on the
System Configuration
screen.
screen
Update Menu.
Firmware Functions
Save-[F1]
AP-4100 Series Access Point Product Reference Guide
.
screen
Alter Filename(s)/HELP
.HELP URL
option
.
field.