Configuring Snmp Settings - Symbol AP-51 Series Product Reference Manual

4.4 Configuring SNMP Settings

Simple Network Management Protocol (SNMP) facilitates the exchange of management information
between network devices. SNMP uses Management Information Bases (MIBs) to manage the device
configuration and monitor Internet devices in potentially remote locations. MIB information accessed
via SNMP is defined by a set of managed objects called object identifiers (OIDs). An object identifier
(OID) is used to uniquely identify each object variable of a MIB. The access point Web download
package contains the following 2 MIB files:
• Symbol-CC-WS2000-MIB-2.0 (common Symbol MIB file)
• Symbol-AP-5131-MIB (AP-5131 specific MIB file)
NOTE The Symbol-AP-5131-MIB contains the majority of the information
If using the Symbol-CC-WS2000-MIB-2.0 and/or Symbol-AP-5131-MIB to configure the AP-5131, use
the table below to locate the MIB where the feature can be configured.
Feature
LAN Configuration Symbol-AP-5131-MIB
VLAN Configuration Symbol-AP-5131-MIB
802.1x Port Symbol-AP-5131-MIB
Authentication
Ethernet Type Filter Symbol-AP-5131-MIB
Configuration
Wireless Symbol-AP-5131-MIB
Configuration
Security Configuration Symbol-AP-5131-MIB
MU ACL Configuration Symbol-AP-5131-MIB
QOS Configuration Symbol-AP-5131-MIB
contained within the Symbol-CC-WS2000-MIB-2.0 file. This feature rich
information has been validated with the Symbol WS2000 and proven
reliable. The remaining portion of the Symbol-AP-5131-MIB contains
supplemental information unique to the access point feature set.
MIB Feature
Subnet Configuration Symbol-CC-WS2000-MIB-2.0
DHCP Server Symbol-CC-WS2000-MIB-2.0
Configuration
Advanced DHCP Symbol-CC-WS2000-MIB-2.0
Server configuration
WAN IP Configuration Symbol-CC-WS2000-MIB-2.0
PPP Over Ethernet Symbol-CC-WS2000-MIB-2.0
NAT Address Mapping Symbol-CC-WS2000-MIB-2.0
VPN Tunnel Symbol-CC-WS2000-MIB-2.0
Configuration
VPN Tunnel status Symbol-CC-WS2000-MIB-2.0
4-17
System Configuration
MIB