System Password Administration - Symbol Spectrum24 AP-4100 Series Product Reference Manual

2.4.2

System Password Administration

This screen allows the network administrator to configure the passwords for
the AP . The user password allows the user to Telnet into the AP or use the
serial port and have read-only privileges. Accessing the UI in an Admin
mode session through the serial port the session does not time-out.
Entering the Admin mode with Telnet and Serial Port interfaces enabled
allows the Admin mode on both interfaces. This can cause a security breach
if a user, without admin privileges, Telnets into the AP while the admin
security level is enabled.
1. To access and change the System Passwords, select
AP-4100 Series Access Point Product Reference Guide
from the System Configuration Menu. The Change System
Admin-[F4]
Passwords screen displays:
Symbol Access Point
Password for user access(Monitor only)
Change System Passwords
User Password *******
Admin Password *******
Save-[F1]
Configuring the AP
System Password
Cancel-[ESC]
73