Symbol Spectrum24 AP-4100 Series Product Reference Manual page 104

Configuring the AP
2. Configure the settings as required:
96
SNMP Agent Defines the SNMP agent mode:
Mode
Disabled
Readonly
Read/Write
trap operations.
Read-Only User-defined password string up to 31 characters
Community identifying users with read-only privileges.
Read-Write User-defined password up to 13 characters for users
Community with read/write privileges.
Ensure the password used matches the Admin
Password used to gain access to the System Password
Administration screen.
All Traps Enables or disables all trap operations.
The default value is
Cold Boot Send a trap to the manager when the AP cold boots.
The default value is
Authentication Indicates that community strings other than those
failure specified for the Read-Only and Read/Write
Community were submitted.
The default value is
Radio Restart Sends a trap to the manager for radio restart.
The default is value
Access Cntrl Sends a trap to the manager when an ACL violation
Violation occurs. The default value is
Trap Host1 The Trap Host1 IP address or Name.
Trap Host2 The Trap Host2 IP address or Name.
disables SNMP functions.
allows get and trap operations.
(default) allows get, set and
Disabled
Disabled
Disabled
Disabled
AP-4100 Series Access Point Product Reference Guide
.
.
.
.
.
Disabled