Symbol Spectrum24 AP-4100 Series Product Reference Manual page 141

To update the AP firmware:
1. Copy the Firmware files on the terminal or PC hard disk.
2. Telnet to the AP using its IP address.
3. At the prompt type the password:
The password is case-sensitive. Set the System Passwords in the Set System
Configuration screen.
4. Select
AP-4100 Series Access Point Product Reference Guide
Symbol
The AP displays the Main Menu.
Symbol Access Point
Show System Summary
Show Interface Statistics
Show Forwarding Counts
Show Mobile Units
Show Known APs
Show Ethernet Statistics
Show RF Statistics
Show Misc. Statistics
Show Event History
Enter Admin Mode
Enter Admin Mode
Symbol
MAIN MENU
AP Installation
Special Functions
Set System Configuration
Set RF Configuration
Set Access Control List
Set Address Filtering
Set Type Filtering
Set SNMP Configuration
Set Event Logging Configuration
and type the password:
Configuring the AP
133