Symbol Spectrum24 AP-4100 Series Product Reference Manual page 73

AP-4100 Series Access Point Product Reference Guide
Web Server Enables the use of a Web based browser to access
the UI.
An AP Reset is required for this feature to take
effect.
Configure Allows the user to enable and configure Kerberos
Kerberos authentication.
System Allows the user to change the passwords for the
Password AP . This screen can be accessed only when the AP
Admin is in Telnet mode.
Serial mode provides read-only privileges and
does not allow the user to view this screen.
Access Allows the user to set one of three Access Control
Control modes: Disabled, Allowed, or Disallowed.
•
•
•
Type Filtering Specifies filter type for packets received either
Forward/Discard or Disabled.
The default value is
WNMP Specifies if the AP can perform WNMP functions.
Functions The default value is
AP-AP State Specifies AP-to-AP communication exchanged.
Xchg
When (default) is selected, no filtering
Disabled
is performed.
When is selected, only MAC addresses
Allowed
specified in the Access Control List are allowed
to associate with the AP .
When is selected, only MAC
Disallowed
addresses not specified in the Disallowed
Addresses List (Address Filtering) are allowed
to associate with the AP .
Disabled
Enabled
Configuring the AP
.
.
65