Symbol Spectrum24 AP-4100 Series Product Reference Manual page 105

3. Verify the values reflect the network environment. Change them as
AP-4100 Series Access Point Product Reference Guide
DHCP Change If enabled, this trap generates the following enterprise-
specific traps:
•
•
•
WLAP If enabled, this trap generates the following enterprise-
Connection specific traps:
Change
•
•
•
•
•
Kerberos Errors
•
needed.
Gateway Address change
Indicates the gateway address for the router has
changed.
IP Address Change
Indicates the IP address for the AP has changed.
IP Address Lease is up
Informs the user the IP address leased from the
DHCP server is about to expire.
Root WLAP Up
Indicates that the Root AP connection is setup and
ready to forward data.
Root WLAP Lost
If the current WLAP fails to receive a Beacon packet
from its Root AP within one second, it considers the
Root AP lost. The WLAP eventually resets itself to
reestablish the network topology.
Designated WLAP Up
Indicates that the Designated WLAP connection is
setup and ready to forward data.
Designated WLAP Lost
If the current WLAP fails to receive a Config BPDU
packet from its Designated WLAP for MAX AGE
time, it considers the Designated WLAP lost.
AP failed to authenticate
MU exceeded time allowed to authenticate.
Configuring the AP
97