Updating Using Tftp - Symbol Spectrum24 AP-4100 Series Product Reference Manual

2.11.1 Updating Using TFTP

The Ethernet TFTP update method requires a connection between the AP and
a computer on the same Ethernet segment. Verify the computer has a TFTP
server running on it. Running the server requires third party software like FTP
PC/TCP for DOS or OnNet™ for Windows. The wireless TFTP update method
requires a connection between the AP and a TFTP server. The TFTP server can
be running on a Symbol Spectrum24 device.
Updating the configuration requires a TFTP server running in the
background.
To update the AP configuration:
1. Copy the configuration file AP_CFG.TXT to the terminal or computer
2. Telnet to the AP using its IP address.
AP-4100 Series Access Point Product Reference Guide
DHCPChange
ServerAuthError
[EventLogConfig]
AnyEventLogging
SecurityViolation
MUStateChanges
WNMPEvents
APIntervalEvents
APAPMessages
TelnetLogins
SystemEvents
EthernetEvents
hard disk.
AllTrapHosts
TrapHost2Only
Enabled
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
Enabled
Disabled
Configuring the AP
; "TrapHost2Only"
; "AllTrapHosts"
; "Disabled",
; "TrapHost1Only"
; "TrapHost2Only"
; "AllTrapHosts"
; "Disabled",
; "TrapHost1Only"
; "TrapHost2Only"
; "AllTrapHosts"
; "Disabled","Enabled"
; "Disabled","Enabled"
; "Disabled","Enabled"
; "Disabled","Enabled"
; "Disabled","Enabled"
; "Disabled","Enabled"
; "Disabled","Enabled"
; "Disabled","Enabled"
; "Disabled","Enabled"
113