Table of Contents
Advertisement
Each key has 40 bits available to the user for configuration and are
displayed in two 20-bit segments. The remaining 24 IV (initialization vector)
bits are factory set and not user configurable.
1. Select the desired key and enter the new value to change the Key value.
2. Verify and change the values set as needed to reflect the network
3. Select
4. Select
5. The system prompts
6. Select
AP-4100 Series Access Point Product Reference Guide
environment.
or
to register settings by writing changes to NVM.
OK
Save
Selecting
displays a confirmation prompt.
Save
Save ALL APs
Maintenance information to all APs with the same Net_ID (ESS).
This option saves the configuration changes for the current AP , sends two
WNMP messages to all other APs on the Known APs table to update their
configuration and resets after the configuration has been modified.
Users can perform this option only among the same hardware platforms
and firmware version.
Type
.
Y
yes no
Cancel-[ESC]
return to the previous menu.
or press
to save the Encryption Key
[F2]
Warning Update, save, and reset all APs in the Known AP Menu?
to disregard any changes made to this screen and
Configuring the AP
91
Advertisement
Table of Contents
