Serial Interface Channel 0 Configuration - NEC PD78052 User Manual

CHAPTER 17 SERIAL INTERFACE CHANNEL 0 ( PD78054Y Subseries)

17.2 Serial Interface Channel 0 Configuration

Serial interface channel 0 consists of the following hardware.
Register
Control register
Note Refer to Figure 6-7. Block Diagram of P20, P21, P23 to P26 and Figure 6-8. Block Diagram of
P22, P27.
344
Table 17-2. Serial Interface Channel 0 Configuration
Item
Serial I/O shift register 0 (SIO0)
Slave address register (SVA)
Timer clock select register 3 (TCL3)
Serial operating mode register 0 (CSIM0)
Serial bus interface control register (SBIC)
Interrupt timing specify register (SINT)
Port mode register 2 (PM2)
Configuration
Note