Table of Contents
Advertisement
CHAPTER 16 SERIAL INTERFACE CHANNEL 0 ( PD78054 Subseries)
16.4 Serial Interface Channel 0 Operations
The following four operating modes are available to the serial interface channel 0.
• Operation stop mode
• 3-wire serial I/O mode
• SBI mode
• 2-wire serial I/O mode
16.4.1 Operation stop mode
Serial transfer is not carried out in the operation stop mode. Thus, power consumption can be reduced. The serial
I/O shift register 0 (SIO0) does not carry out shift operation either and thus it can be used as ordinary 8-bit register.
In the operation stop mode, the P25/SI0/SB0, P26/SO0/SB1 and P27/SCK0 pins can be used as ordinary input/
output ports.
(1) Register setting
The operation stop mode is set with the serial operating mode register 0 (CSIM0).
CSIM0 is set with a 1-bit or 8-bit memory manipulation instruction.
RESET input sets CSIM0 to 00H.
Symbol
<7>
<6>
<5>
CSIM0 CSIE0 COI
WUP
R/W
CSIE0
Serial Interface Channel 0 Operation Control
0
Operation stopped
1
Operation enabled
4
3
2
1
CSIM04 CSIM03 CSIM02 CSIM01 CSIM00
0
Address
After Reset
FF60H
00H
R/W
R/W
301
Hide quick links:
Advertisement
Table of Contents
