NEC PD78052 User Manual page 485

Note 1
Interrupt Default
Type Priority
Name
Maskable 13 INTTM3
14 INTTM00
15 INTTM01
16 INTTM1
17 INTTM2
18 INTAD
Software —
Notes 1. Default priorities are intended for two or more simultaneously generated maskable interrupt requests.
0 is the highest priority and 18 is the lowest priority.
2. Basic configuration types (A) to (E) correspond to (A) to (E) of Figure 21-1.
CHAPTER 21 INTERRUPT AND TEST FUNCTIONS
Table 21-1. Interrupt Source List (2/2)
Interrupt Source
Trigger
Reference time interval signal from
watch timer
Generation of 16-bit timer register,
capture/compare register (CR00)
match signal
Generation of 16-bit timer register,
capture/compare register (CR01)
match signal
Generation of 8-bit timer/event
counter 1 match signal
Generation of 8 bit timer/event
counter 2 match signal
End of A/D converter conversion
BRK BRK instruction execution
Vector Basic
Internal/
Table Configuration
External
Address Type
Internal 001EH (B)
0020H
0022H
0024H
0026H
0028H
— 003EH (E)
Note 2
485