NEC PD78052 User Manual page 343

CHAPTER 17 SERIAL INTERFACE CHANNEL 0 ( PD78054Y Subseries)
2
(4) I C (Inter IC) bus mode (MSB-first)
This mode is used for 8-bit data transfer with two or more devices using two lines of serial clock (SCL) and
serial data bus (SDA0 or SDA1).
This mode is in compliance with the I
data onto the serial data bus: "start condition", "data", and "stop condition", to be actually sent or received.
The receiver automatically distinguishes the received data into "start condition", "data", or "stop condition",
by hardware.
Figure 17-1. Serial Bus Configuration Example Using I
Master CPU
SDA0 (SDA1)
2
C bus format. In this mode, the transmitter can output three kinds of
V V
DD
DD
SCL
2
C Bus
Slave CPU1
SCL
SDA0 (SDA1)
Slave CPU2
SCL
SDA0 (SDA1)
Slave CPUn
SCL
SDA0 (SDA1)
343