Setting The Date And Time - HP StoreEver MSL2024 User And Service Manual

Hide thumbs Also See for StoreEver MSL2024:
Table of Contents

Advertisement

Figure 50 Configuration > Password page
You can change the:
Password — The password is exactly eight numbers, each from 0 to 9.
Password Time Out — The number of minutes that the current administrator login session
will remain logged in without user interaction. The default is 30 minutes.

Setting the date and time

Use the
Configuration > Date/Time page
NOTE:
The device does not adjust its time to daylight saving time; the time must be adjusted
manually.
Figure 51 Configuration > Date/Time page
You can change:
Time — configures the hours, minutes, and seconds for the internal clock. The time is based
on a 24-hour clock, where 1:00 pm is 13:00.
Date — configures the current month, day, and year for the internal clock.
78
Operating the tape library
to set the date and time.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storeever msl4048Storeever msl8048Storeever msl8096

Table of Contents