Information Events - HP StoreEver MSL2024 User And Service Manual

Table 41 Configuration change events (continued)
Value Configuration event
0x68 World wide identifier base has been changed
0x69 EUI64 identifier has been changed
0x6E License key has been added or removed
0x71 User interface language change
0x72 DPF enabled
0x73 DPF disabled
0x74 CPF enabled
0x75 CPF disabled
0x76 Magazine access changed
0x78 Ignore barcode Media ID configuration changed
0x7E KMIP encryption enabled
0x7F KMIP encryption disabled

Information events

Table 42 Informational events
Value Informational event
0x01 Move element
0x02 Inventory rescan
0x03 Drive clean
0x04 Mailslot open
0x05 Mailslot close
0x06 Magazine remove
0x07 Magazine reinsertion
0x08 Power on
0x09 Power off
0x0A User login
0x0B User logout
0x0C System test run
0x0D Wellness test run
0x0E Bus reset occurred
0x0F Device reset
0x10 Abort
0x11 Drive tape alert flag
182 Troubleshooting
Description
The world wide identifier base has been changed
EUI64 identifier has been changed
License key has been added or removed
User interface language has changed
Data path failover was enabled
Data path failover was disabled
Control path failover was enabled
Control path failover was enabled
The setting for whether the administrator password
is required to remove magazines or not has been
changed.
The setting for whether the Media ID is required
or ignored has been changed.
KMIP-based encryption was enabled.
KMIP-based encryption was disabled.
Description
Move element command
The inventory was rescanned
Drive cleaning process
Open mailslot command
Close mailslot
Magazine remove event
Magazine insertion event
Power on event
Power off event
User login at interface (RMU, OCP, SERIAL)
User logout at interface (RMU, OCP, SERIAL)
System test run
The wellness test was run
A bus reset occurred
Device reset command
SCSI task aborted
Drive reported informational tape alert flag